Which among the Melbourne Skylights Is Right for Your Home?
There are different types of Melbourne Skylights. Let us discuss them. The term ‘skylight’ or ‘roof window’ is often used to describe various styles. Skylights are one of the easiest and quickest ways to make any room of your house lighter & brighter, adding an open & airy feeling.
Ventilating Melbourne Skylights are excellent for kitchens & bathrooms. In addition to offering extra light, they open too. This overhead ventilation produces an updraft. These can be operated by various means:
Controlled by temperature sensor
Electric on/off wall switch
Manual or motorized hand crank
Fixed Melbourne Skylights are only for additional light. They are great for attics, bonus rooms or wherever you want extra illumination without exhaustion or entrance of air. Sizes and styles vary from domes to rectangles. Glass & acrylic or plastic skylights are easily available.
Tubular skylights are slightly new in the market. Their small size allows them to be used in spaces where full-size skylights are a problem to fit in. Bathrooms, hallways, even closets are able to accommodate a tubular skylight. They provide you with a lot of light in spite of having a small size. The concept & installation process are basically the same as it is for a regular skylight, except that they have an enclosed tunnel of reflective material. They come in many sizes. The small ones are 10 to 12 inches in diameter and the larger ones are of 24 inches.
Flat glass Melbourne Skylights come mounted in a wood or integrated rubber & metal framework, and need no additional curb construction. After the hole is properly cut, the skylight frame is attached to the roof sheathing with L-brackets. Thereafter, the installation is done by using the factory-supplied flashing kit.
What adds to the popularity and higher cost of glass skylights?
Ease of installation
Superior insulating qualities
Less tendency to scratch
A cleaner finished appearance
Glass skylights have a huge number of optional accessories including:
Tempered, laminated or wire glass
Shades & blinds for light control
Glass tints for heat retention & to block sunlight
The ability to open fully & partially for ventilation
Domed acrylic Melbourne Skylights are cheaper than glass. The acrylic dome is usually mounted in an aluminum frame that is in turn mounted on a box called a curb. Once the hole is cut in the roof, the curb is constructed on-site to elevate the skylight above the roof sheathing. Site-built & factory-supplied flashings are used to firmly seal the roofing around the curb. These skylights are available in clear, bronze, smoked, or other tints. Some of them are flush mounted; which means that the lens & flashing piece are made of plastic and are placed on the roof without a curb. The problem with this kind is that they are loud and susceptible to leakage.
If the room you want to illuminate with Melbourne Skylights has an open ceiling with absolutely no attic space above, you can easily install the skylight without having to construct a light shaft. This is, by far, the simplest installation and it offers you the maximum amount of light and view of the sky.
You will have to position & mark the opening on the ceiling after your skylight is installed. Take into account the size of the room and the amount of light you want to bring in, and select the size & position of the hole accordingly. Once skylight has been installed and the ceiling hole is cut, it is then a matter of connecting the 2 with the shaft, which is usually constructed from lumber. The angles involved usually require some tricky framing, and is perhaps best left to a skilled and experienced carpenter.
After the framing is done, the inside of the shaft is to be covered with wood, and the attic side is to be insulated to minimize the heat loss. To reflect a greater amount of light into the room, painting the inside of the shaft with semi-gloss or gloss white paint is a good option. This is how you carry out Skylight Installation in Melbourne.
The glass Melbourne Skylights are far more superior to the plastic ones. The best glass skylights are the surface-mounted. The flashing, curb, lens, are all made together. They don’t have separate moving parts. This makes these less susceptible to leakage & much quieter when it rains.